Tormek Accessories

Exact Angle Setting for Knives The Tormek KS-123 Knife Angle Setter allows you to set the exact sharpening angle for virtually any knife. It works ...

Stay Organized in the Shop or on the Go Keep your Tormek jigs and accessories safely stored and organized with the Tormek TC-800 Case. This ...

Fits the KJ-45 and KJ-140 Knife Jigs The HTK-00-SVM Hand Tool Kit Storage Tray is the same as the one is included with the new edition of the HT...

Newly Redesigned The New TNT-00 Woodturner's Storage Tray is the same as the one included with the New TNT-808 Woodturner’s Kit. The storage tr...

Newly Redesigned The New T8-00 Storage Tray for Tormek T-8 Accessories replaces the top foam tray found in the Tormek T-8 packaging. The storag...

Convert Horizontal Mount to Vertical With the MB-102 Multi Base, it is now possible to use jigs in the vertical configuration. In addition to all...

Makes Water Non-Corrosive Add Tormek SCC-150 Anti-Corrosion Concentrate to water at a ratio of 10ml of concentrate to 250ml of water before fill...

The Tormek Honing Compound is used on the leather honing wheels. Grain averages 3 microns (roughly 8000 grit). This will polish the edge of tool...

The SP-650 Stone Grader is one of the most unique features of the Tormek Sharpening System. The stone grader is used to change the grit of the Gr...

The Latest 2019 Version of the TT-50 With this unique tool, Tormek TT-50, you can true and dress your grindstone exactly round and flat. It mou...

The ADV-D Diamond Exchange Tip is used with the Tormek Truing Tool. It is a direct replacement for the Diamond Tip that comes with the Truing Too...

NEW! The Tormek Mounting for Bench Grinder now comes with adjustable metal mounting bracket. Finally, you can have the best of both worlds. Fast ...

Protect your beloved Tormek Sharpening System with the MH-380 Machine Cover. Yes, your machine is durable and doesn't require a cover. However, i...

The MSK-200 is a replacement stainless main shaft for the Tormek T-4. It includes all the nuts washers and pins needed for proper replacement. W...

The MSK-250 replacement stainless main shaft for the Tormek T-7 and T-8. It includes all the nuts washers and pins needed for proper replacement....

Okay, I'll admit it is hard to get too excited about labeling your turning tools. However, labeling the settings for each of your turning tools i...

The SVD-005 is the upgrade kit for the Tormek SVD-180. This upgrade kit brings your older SVD-180 to the specifications of the SVD-185. Includes ...

The Tormek TNT-10 Turner's Instruction Handbook shows you how to shape and sharpen all your turning tools. The handbook is written by Torgny Jan...

The TTS-100 Turning Tool Setter allows for instant replication of the geometries on turning gouges and skews when using the SVD-186 Gouge Jig an...

The US-103 is very worthwhile upgrade to your older Tormek 1200 or use it as an additional support for your T-4. This is the same piece that com...

A very worthwhile upgrade to your Tormek T-8, T-7 or 2000 model is to have an additional US-105 Universal Support. This is the same piece that c...

Sharpen Longer and Wider Tools The Extended Universal Support is for sharpening long or wide tools such as long knives, cleavers and machetes. At ...

This nut is a direct replacement for your T-7 / T-8 / T-4Universal Support. AKA Part Numbers R-1162, US-105N, 1162. Included with US-105 Univ...

The WM-200 AngleMaster has two functions: You can use it to set the jig to the grindstone so that it grinds your tool to any desired edge angle ...

The book is enclosed with each Tormek T-7 machine. You can purchase a second to keep by your bedside or you can replace your older edition with b...

Rotate your Tormek! Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from t...

With the RM-533 Tormek Rubber Work Mat you get a water proof yet non slip surface. The raised rim will retain any water spillage. 533×343 mm (21"...

The OWC-1 is an attachment to adapt the Tormek Bench Grinder Mounting Kit BGM-100 directly to a Wolverine v-arm.* Mounting on a Wolverine v-armI...

If you already have a Wolverine* v-arm on your grinder, now you can use the Tormek jigs as well. The OWC200 provides you with a Tormek Universa...

Enlarged Lip The Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. ...

This Tormek T4 Water Trough is a direct replacement for the trough that comes with the Tormek T4. Will also fit the T3 model. Tormek Part #R3176

This Tormek T8 Water Trough is a direct replacement for the trough that comes with the Tormek T8. It fits only the T8 model Tormek. If you have a ...

The replacement scraper for the TOR-3090 T8 Water Trough.

This is the replacement base found on the Tormek T7. It can be used to upgrade your Tormek Supergrind 1200 and Supergrind 2000. Includes all nec...

Tormek EM-15 Edge Marker This high-quality, permanent marker with a chisel tip makes it easy to color the bevel when you want to find and repli...

This is the latest edition of the Tormek DVD. It comes standard with both the T8 and T4 Tormek Systems. It includes sections on all the of the To...