Tormek

NEW! The Tormek Mounting for Bench Grinder now comes with adjustable metal mounting bracket. Finally, you can have the best of both worlds. Fast ...

The SE-77 comes standard with the Tormek T8 and is also available independently. It is a further development of and replacement for the previous...

The WM-200 AngleMaster has two functions: You can use it to set the jig to the grindstone so that it grinds your tool to any desired edge angle ...

The Tormek Gouge Jig usually needs no introduction to Wood Turners, this jig alone is reason enough to own a Tormek. Even skilled turners may f...

The Tormek Multi Jig is appropriately named because it offers the ability to sharpen skews, rouging gouges, straight carving gouges and parting ...

The TTS-100 Turning Tool Setter allows for instant replication of the geometries on turning gouges and skews when using the SVD-186 Gouge Jig an...

The SVD-110 Tool Rest is ideal for the grinding of turning scrapers and special tools for woodcarving, e.g. large scorps and inshaves. Also for ...

The attachment comprises support (1), blade holder (2) and allen key (3). In this attachment the tool is guided precisely and ground flat alo...

The Small Knife Holder SVM-00 from Tormek works in conjunction with the KJ-45 Knife Jig and opens up the ability to work with complete control on...

The SVS-38 Short Tool Jig replaces the SVS-32. The two jigs are the same except that the new SVS-38 can accommodate tools up to 38mm (1-1/2")...

For all shapes and makes of moulding knives with 24, 30 or 38 mm distance between guide holes. Sharpens the face of the blade and therefore any...

For scissors and shears. The scissors is mounted in a holder, which supports freely on a support plate so you can follow the individual convex ...

An axe is often considered a crude enough tool that most people tend to just put it on their grinder and assume that a quick grind is enough. Ho...

Enlarged Lip The Advanced Water Trough AWT-250 has an enlarged standard lip which ensures that your workbench stays free from water. ...

This is the latest edition of the Tormek DVD. It comes standard with both the T8 and T4 Tormek Systems. It includes sections on all the of the To...

These are the standard leather wheels for the Tormek Profiled Leather Wheel. This is ideally suited to gouges and v-tools. The discs have a r...

These are the narrow leather wheels for the Tormek Profiled Leather Wheel. This is ideally suited to small gouges and v-tools. The narrow dis...

Protect your beloved Tormek Sharpening System with the MH-380 Machine Cover. Yes, your machine is durable and doesn't require a cover. However, i...

The MSK-200 is a replacement stainless main shaft for the Tormek T-4. It includes all the nuts washers and pins needed for proper replacement. W...

The MSK-250 replacement stainless main shaft for the Tormek T-7 and T-8. It includes all the nuts washers and pins needed for proper replacement....

Okay, I'll admit it is hard to get too excited about labeling your turning tools. However, labeling the settings for each of your turning tools i...

The SVD-005 is the upgrade kit for the Tormek SVD-180. This upgrade kit brings your older SVD-180 to the specifications of the SVD-185. Includes ...

The Tormek TNT-10 Turner's Instruction Handbook shows you how to shape and sharpen all your turning tools. The handbook is written by Torgny Jan...

The US-103 is very worthwhile upgrade to your older Tormek 1200 or use it as an additional support for your T-4. This is the same piece that com...

A very worthwhile upgrade to your Tormek T-8, T-7 or 2000 model is to have an additional US-105 Universal Support. This is the same piece that c...

Sharpen Longer and Wider Tools The Extended Universal Support is for sharpening long or wide tools such as long knives, cleavers and machetes. At ...

This nut is a direct replacement for your T-7 / T-8 / T-4Universal Support. AKA Part Numbers R-1162, US-105N, 1162. Included with US-105 Univ...

The book is enclosed with each Tormek T-7 machine. You can purchase a second to keep by your bedside or you can replace your older edition with b...

This is the replacement base found on the Tormek T7. It can be used to upgrade your Tormek Supergrind 1200 and Supergrind 2000. Includes all nec...

Tormek Drive Wheel With Friction Ring. Fits the T8, T7 and 2000 models. With the introduction of the T8 model, the Drive Wheel was changed to hav...

Rotate your Tormek! Some tools are best sharpened with the stone running towards the edge and other tools should have the stone running away from t...

The ADV-D Diamond Exchange Tip is used with the Tormek Truing Tool. It is a direct replacement for the Diamond Tip that comes with the Truing Too...

The OWC-1 is an attachment to adapt the Tormek Bench Grinder Mounting Kit BGM-100 directly to a Wolverine v-arm.* Mounting on a Wolverine v-armI...

If you already have a Wolverine* v-arm on your grinder, now you can use the Tormek jigs as well. The OWC200 provides you with a Tormek Universa...

With the RM-533 Tormek Rubber Work Mat you get a water proof yet non slip surface. The raised rim will retain any water spillage. 533×343 mm (21"...

This Tormek T4 Water Trough is a direct replacement for the trough that comes with the Tormek T4. Will also fit the T3 model. Tormek Part #R3176